This is the documentation of iya-sts 1.0.0. The latest is 1.1.0.

Management API

What happened here, in order — history rather than state, and read-only. It carries no credential of any kind and has no clear operation: an erase control on an administrative surface would make an audit log unable to answer the one question it exists for.

Every answer is checked against the model shown here before it is sent, and no answer carries a member its model does not list. A member shown as any JSON is one whose shape belongs to somebody else, and says whose. .{key} is a key that is data, and [] an element of a list.

A refusal

Unless an operation below says otherwise, any status it does not list answers this:

Member Type Required What it is
error string    
error_description string    
errors list    
errors[] string    
message string    
ok boolean    
status integer    
why string    

GET /admin-api/audit

getAudit

What happened here, in order, filtered and paged

Every authentication, session, LDAP directory operation, console interaction, management API call and protocol endpoint call, newest first.

This is HISTORY where the rest of this API is STATE. /admin-api/metrics can say the directory holds eleven entries; only this can say a twelfth was created at 14:02 and deleted at 14:03 by somebody bound as uid=carol, over LDAPS.

NO CREDENTIAL IS EVER IN A ROW. Not a password, not a bearer token, not an assertion, and no request or response body. A modify names the attributes it changed and never their values, because a modify is where a userPassword gets set; a compare says whether it matched and not what was tried; an authorization code in a query string is replaced with (redacted).

One act usually produces several events. A sign-in writes three — the HTTP call, the credential being accepted, and the session that came out of it. They are three facts at three layers, and a Kerberos AS-REQ authenticates somebody and starts no session at all.

RESUME BY at, not by page. Every event has a seq that is unique across every process of the service and never reused, including across a drop and a restart, and that rises within each process (#465). It is NOT one order across processes — request workers and cluster nodes each number from blocks of their own — so read what is new by at, with seq (and origin) as the tie-break and as the event’s name.

Mirrors GET /admin/audit on the admin console.

Scope: admin:read.

Parameters

Name In Type Required What it is
category query one of authentication, session, directory, admin, api, application, protocol, spiffe, signals, authorization, service, mail   One of the categories. The reply’s categories member describes each of them.
action query one of authentication, authentication.refused, portal.activate, portal.activate.refused, portal.password.changed, authn.password.changed, portal.password.refused, portal.password.csrf, portal.signout, portal.signout.csrf, portal.key.enrolled, portal.key.removed, portal.key.renamed, portal.tls-client.issued, portal.tls-client.revoked, activation.issued, portal.password-reset, portal.password-reset.refused, authn.mfa.enrolment.required, authn.mfa.enrolment.started, authn.mfa.enrolment.offered, authn.mfa.enrolment.declined, authn.second-factor.skipped, authn.mfa.enrolment.at-risk, authn.mfa.enrolled, authn.recovery.refused, authn.recovery.limited, authn.recovery.completed, authn.sign-in.started-over, portal.mfa.started, portal.mfa.enrolled, portal.mfa.refused, portal.mfa.removed, portal.mfa.csrf, portal.activate.mfa.started, portal.activate.mfa.refused, portal.activate.key.started, portal.activate.key.enrolled, portal.activate.key.refused, session.start, session.end, session.renew, authn.session.bound, authn.session.refreshed, authn.session.binding-skipped, logout.global, logout.selective, logout.backchannel, mail.queued, mail.sent, mail.dead, mail.refused, mail.reset-requested, mail.retry, mail.template, branding.logo, mail.verified, mail.preferences, scheduler.run, scheduler.step-down, keys.rotate, keys.rotate.emergency, application.secret-expiring, application.secret-expired, keys.retire, keys.data-key-rotate, keys.data-key-reencrypt, keys.data-key-destroy, keys.kek-rotate, keys.pin, keys.unpin, oidfed.key-minted, oidfed.key-rotated, oidfed.key-revoked, oidfed.subordinate-set, oidfed.subordinate-removed, oidfed.anchor-set, oidfed.anchor-removed, oidfed.mark-type-set, oidfed.remove-mark-type, oidfed.mark-policy-set, oidfed.remove-mark-policy, oidfed.mark-issued, oidfed.mark-revoked, oidfed.held-mark-added, oidfed.held-mark-removed, oidfed.act-refused, oidfed.resolved, device.create, device.browser.remembered, device.update, device.delete, device.evict, device.attestation-revoked, webauthn.ceremony, webauthn.algorithm-mismatch, webauthn.client.learned, webauthn.attestation-revoked, device.key-add, device.key-remove, device.compliance, device.enrol.refused, user.create, user.delete, user.update, user.rename, cells.rehome, user.query, group.create, group.delete, group.update, group.rename, entry.create, entry.delete, entry.update, entry.rename, directory.search, directory.compare, directory.bind, application.create, application.secret-revealed, application.export, application.import, application.add-owner, application.remove-owner, application.update, consent.grant, consent.deny, consent.revoke, application.delete, oidfed.registered, oidfed.registration-refused, admin.view, admin.change, admin.config-dump, claims.change, admin.role.change, admin.console.bootstrap, admin.mail.set, admin.pseudonym.set, admin.mfa.totp.cleared, admin.mfa.key.cleared, admin.mfa.key.renamed, admin.password.reset, admin.password.reset-link, admin.mfa.primary-keys.removed, admin.mfa.disabled, admin.mfa.required, admin.mfa.unrequired, admin.delegation.not-delegated, admin.delegation.may-act, admin.delegation.semantics, portal.delegation.may-act, portal.delegation.search, admin.password-policy.change, admin.authn-policy.change, admin.locale-policy.change, admin.post-login-policy.change, authn.post-login.asked, authn.post-login.skipped, authn.post-login.done, authn.post-login.held, admin.post-login-activity.change, authn.post-login.activity-run, authn.post-login.unsupported, webauthn.key.possibly-replaced, authn.mail-factor.change, authn.mail-factor.sent, authn.mail-factor.accepted, authn.mail-factor.refused, admin.truststore.change, admin.pki.trust.change, krb5.keys.derived, krb5.trust.sid-filtered, admin.krb5.keys.cleared, admin.krb5.service.created, admin.krb5.service.rotated, admin.krb5.service.deleted, admin.krb5.previous.dropped, api.read, api.change, protocol.call, oauth.token.revoke, protocol.failure, service.failure, spiffe.svid.issue, spiffe.svid.validate, spiffe.entry.create, spiffe.entry.update, spiffe.entry.delete, spiffe.agent.create, spiffe.agent.attest, spiffe.agent.ban, spiffe.agent.unban, spiffe.agent.delete, spiffe.bundle.read, spiffe.bundle.change, spiffe.call.refuse, xacml.decision, xacml.enforcement, authzen.decision, authzen.search, fga.decision, admin.authzen.attribute.set, admin.authzen.attribute.removed, admin.authzen.scope.set, admin.authzen.pep.granted, admin.authzen.callbacks.set, authzen.access-request.submitted, authzen.access-request.approved, authzen.access-request.denied, authzen.access-request.expired, authzen.access-request.cancelled, authzen.access-request.revoked, authzen.access-request.approver-refused, authzen.access-request.callback, xacml.issuance.refused, xacml.access.refused, xacml.issuance.alarm, xacml.pep.register, xacml.pep.certificate, xacml.pip.query, saml2.request.signature, gnap.grant.request, gnap.grant.consent, gnap.grant.deny, gnap.grant.approve, gnap.grant.revoke, gnap.grant.owner-queued, gnap.grant.forward, uma.resource.register, uma.resource.update, uma.resource.delete, uma.permission.ticket, uma.decision, uma.grant, uma.pct.revoke, uma.approval.request, uma.approval.answer, uma.claims.gathered, uma.share.add, uma.share.remove, uma.policy.alfa, uma.resource-server.enable, uma.resource-server.disable, uma.owns-resources.set, uma.rpt.revoke, gnap.grant.finalize, gnap.token.issue, gnap.token.rotate, gnap.token.revoke, gnap.rs.introspect, gnap.rs.register, ssf.stream.create, ssf.stream.update, ssf.stream.delete, ssf.stream.status, ssf.subject.change, ssf.event.transmit, ssf.announcement.broadcast, ssf.event.refused, ssf.stream.dead, ssf.stream.revived, ssf.stream.delivery, ssf.deadletter.clear, ssf.event.receive, caep.event.auto, caep.event.emit, caep.session.reset, caep.session.clear, risc.event.auto, risc.event.emit, risc.account.reset, risc.account.clear, persistence.minted-drop, admin.aud-sub.set, admin.mfa.backup-codes.cleared, admin.password.reset-keytab, admin.user.attribute, admin.service-account.set, admin.service-account.cleared, admin.service-account.owner-added, admin.service-account.owner-removed, admin.service-account.destination-set, admin.service-account.rotate, admin.app-password.created, admin.app-password.revoked, admin.ciba.answered, admin.device.removed, admin.ida.recorded, admin.ida.removed, admin.siop.enrolled, admin.siop.removed, admin.siop.preferred, admin.passkey.enrolment-started, admin.passkey.enrolment-refused, admin.passkey.enrolled, admin.passkey.upgrade-started, admin.passkey.upgrade-refused, admin.passkey.upgrade-proved, admin.passkey.upgrade-cancelled, admin.passkey.upgraded, ssf.signals.discover, ssf.signals.stream, ssf.signals.unblock, ssf.signals.read-stream, ssf.signals.update-stream, ssf.signals.delete-stream, ssf.signals.set-status, ssf.signals.add-subject, ssf.signals.remove-subject, ssf.signals.verify, application.key-issued, enrollment.acme.account.create, enrollment.acme.account.deactivate, enrollment.acme.account.key-change, enrollment.eab.create, enrollment.eab.delete, enrollment.challenge.create, enrollment.challenge.delete, enrollment.issue, enrollment.issue.refused, enrollment.revoke, federation.signal-block, federation.signal-unblock, federation.signout, federation.signout-answered, federation.unlink, federation.connected, federation.provider-notification, federation.group-ignored, group.add-member, group.add-owner, group.remove-owner, group.owner-protected, group.set-mail, group.set-policy, krb5.keytab.person, logout.backchannel.retry, oauth.device-secret.revoke, oauth2.ciba.notify, oauth2.claim-source-linked, oauth2.claim-source-link-refused, oauth2.claims-providers.add-provider, oauth2.claims-providers.update-provider, oauth2.claims-providers.remove-provider, oauth2.claims-providers.revoke-link, oauth2.command, oauth2.command.tenant, oauth2.grant-revoked, oauth2.par.withdraw, password.set, service-account.rotated, service-account.rotation-failed, portal.app-password.created, portal.app-password.revoked, portal.app-password.csrf, portal.certificates.csrf, portal.device.remove, portal.device.remember-browser, portal.kerberos.keytab, portal.kerberos.refused, portal.kerberos.csrf, portal.key.started, portal.key.refused, portal.key.upgrade-started, portal.key.upgrade-refused, portal.key.upgraded, portal.mfa.backup-codes.generated, portal.mfa.backup-codes.confirmed, portal.mfa.backup-codes.discarded, portal.risc.optOutInitiated, portal.risc.optOutCancelled, portal.risc.optIn, portal.signing-key.issued, portal.signing-key.removed, portal.signing-key.csrf, portal.signing-key.revoked, did.person.published, did.person.version, did.person.authorized, did.person.deactivated, admin.did.deactivated, portal.siop.enrol, portal.siop.remove, portal.siop.prefer, portal.siop.view, portal.siop.did, siop.key.pinned, siop.key.refused, portal.vc.offer, portal.vc.remove, risk.feedback, risk.response, risk.terms.accept, attribute-sources.add, attribute-sources.update, attribute-sources.remove, attribute-sources.refresh, scim-client.change, scim-client.delivery, scim-client.reconcile, scim-client.queue, secret-destination.push, secret-destination.test-push, roles.add-owner, roles.remove-owner, roles.create, roles.delete, roles.describe, node-health.collect-garbage, saml2.authnrequest, saml2.artifact.resolve, saml2.attribute-query, saml2.metadata.mdq, saml2.metadata.refresh, account.add, account.select, account.switch, account.forget, account.ambiguous, session.reauthenticate, session.presented, session.refuse, session.refused, ssf.event.act, ssf.stream.swept, xacml.pep.enable, xacml.pep.disable, xacml.pep.forget, xacml.policy.write, xacml.policy.delete, report.definition.create, report.definition.update, report.definition.share, report.definition.delete, report.job.submit, report.job.start, report.job.complete, report.job.fail, report.job.cancel, report.notify, report.query, report.job.retrieve, admin.audit-export.add, admin.audit-export.update, admin.audit-export.remove, admin.audit-export.enable, admin.audit-export.disable, admin.audit-export.test, audit.export.test   One action. ANDed with category, so an action from another category matches nothing — which is what an empty list then means. The reply’s actions member lists every action with the category it belongs to.
outcome query one of success, refused, error   Three rather than two on purpose: a refused is this service working correctly and saying no, an error is this service failing, and collapsing them would bury the one row worth paging somebody about under the fifty that are a client getting its parameters wrong.
actor query string   Substring of either spelling of the actor, case-insensitive — the normalised key (alice) or the form it was presented in (a bind DN, alice@REALM, an X.509 subject). A substring because the collapse to one key can only be done where an identity is normalised, and a directory row’s actor is a DN.
q query string   Substring of the summary, the target or the action, case-insensitive.
code query string   The FRONT of an error code: a whole code is one failure condition and STS-OAUTH every failure in that subsystem. docs/error-codes.md lists them. Every refused or failed request carries a code; no code is ever sent to the client that made the request.
address query string   The FRONT of the client’s IP address, case-insensitive: a whole address is one client and 10.0. every client in that range. A prefix rather than a substring, so 10.0.0.1 cannot match inside 110.0.0.12.
page query integer   Which page of the match to return. CLAMPED rather than refused: a page past the end returns the last one, and the reply says which page it actually is.
per query integer   Rows per page. Defaults to 50 and is capped at 300. On a drill-down it is SHARED by every list in the reply, which each carry a page number of their own.
DPoP header string   RFC 9449: the proof of possession for a DPoP-bound access token, as Authorization: DPoP <token> requires.
cell query string   The cell to answer this request, where this service runs as several. Ignored in a service that runs as one.

200: The matching events, with the paging that found them and the vocabulary the filters take.

Member Type Required What it is
actions list    
actions[].action string    
actions[].category string    
actions[].label string    
byAction map    
byAction.{key} number    
byCategory map    
byCategory.{key} number    
byOutcome map    
byOutcome.{key} number    
categories list    
categories[].category string    
categories[].label string    
categories[].what string    
dropped integer   Events discarded to stay under the cap.
events list    
events[].action string    
events[].actor string    
events[].actorForm string    
events[].address string    
events[].at number    
events[].category string    
events[].channel string    
events[].detail any JSON   What this one kind of event recorded about its own act: several hundred call sites each name their members, and values are trimmed by detailOf(). What this one kind of event recorded about its own act: several hundred call sites each name their members, and values are trimmed by detailOf().
events[].errorCode string, or null    
events[].mac string    
events[].origin string, or null    
events[].outcome string    
events[].prev string    
events[].protocol string    
events[].seq number    
events[].summary string    
events[].target string    
filter object    
filter.action string, or null    
filter.actor string, or null    
filter.address string, or null    
filter.category string, or null    
filter.code string, or null    
filter.outcome string, or null    
filter.q string, or null    
firstRow integer    
held integer   Events currently in the log.
knownActors map   The actors on this page that are people known here.
knownActors.{key} boolean    
lastRow integer    
matched integer    
maxEvents number   The cap: audit.maxEvents.
newestSeq number    
oldestSeq number    
outcomes list    
outcomes[] string    
page integer    
pages integer    
paging object   Which page of how many, and the query parameter that moves it.
paging.firstRow integer    
paging.lastRow integer    
paging.noun string    
paging.page integer    
paging.pages integer    
paging.param string    
paging.perPage integer    
paging.total integer    
perPage integer    
persisted boolean    
protocolCalls boolean   Whether ordinary protocol endpoint calls are being recorded.
recorded integer   Events recorded since this process started.
settings object   The settings this page draws, described: the same rows GET /config returns, filtered to the ones this page owns.
settings.context object    
settings.context.configFile string, or null    
settings.context.defaultsFile string    
settings.context.inRealm boolean    
settings.context.persistenceMode string    
settings.context.persistsAppconfig boolean    
settings.context.persistsRealms boolean    
settings.context.realmId string    
settings.editableCount integer   How many of them can be changed while the service runs.
settings.groups list   In the order config.js declares them.
settings.groups[] object   One group’s settings.
settings.groups[].group string    
settings.groups[].settings list    
settings.groups[].settings[] object   One setting: what it is, what it is set to, and where that came from.
settings.groups[].settings[].appconfigPath string    
settings.groups[].settings[].csvValueNotes map   Present beside csvValues where the setting describes each value: the value mapped to one sentence.
settings.groups[].settings[].csvValueNotes.{key} string    
settings.groups[].settings[].csvValues list   Present on a csv setting whose entries must each be one of these; absent on an open list.
settings.groups[].settings[].csvValues[] string    
settings.groups[].settings[].default list, or string, or number, or boolean, or null    
settings.groups[].settings[].default[] string, or number, or boolean    
settings.groups[].settings[].description string   What it does and why the default is the default.
settings.groups[].settings[].editRefusal string   Why this row cannot be edited from the realm the reader is in: realms.maxCount while a realm other than the default is ambient. Absent on every row of the default realm’s answer.
settings.groups[].settings[].editable boolean   Whether POST /config/set will take it from the realm this answer was read in. False means either the value was consumed at startup or editRefusal is set. It is refused rather than accepted, because an accepted change that does nothing reads as having worked.
settings.groups[].settings[].enumValues list   Present on enum settings only.
settings.groups[].settings[].enumValues[] string    
settings.groups[].settings[].env string   Its environment variable.
settings.groups[].settings[].group string   The protocol it belongs to, and the console’s section heading.
settings.groups[].settings[].key string   The dot path, which is BOTH the name every operation here takes and the path in the appconfig file. oid4vci.batchSize is appconfig.oid4vci.batchSize.
settings.groups[].settings[].label string    
settings.groups[].settings[].masked boolean   Present, true, when a sensitive value here was replaced.
settings.groups[].settings[].max number   The highest value it will take.
settings.groups[].settings[].min number   The lowest value POST /config/set will take, on an int setting that declares one.
settings.groups[].settings[].ordered boolean   Present, true, on a csv setting whose order is a preference: the first value is the most preferred.
settings.groups[].settings[].overridden boolean   Whether a runtime override is in force. Equal to source === "override", and reported separately so a caller can filter without matching a string.
settings.groups[].settings[].realmSettable boolean   Whether a trust realm may hold its own value for it.
settings.groups[].settings[].restartReason string   Why it is not editable, when the value was consumed at startup.
settings.groups[].settings[].selectAll object   Present on an ordered setting whose select-all is narrowed by other settings. onlyWhileOn: the values are selected only while that setting is on. aloneWhileOn: while that setting is on, only the values are selected. canBeOn is false where this mode never lets that setting be on.
settings.groups[].settings[].selectAll.aloneWhileOn list    
settings.groups[].settings[].selectAll.aloneWhileOn[].canBeOn object   Nested deeper than this page draws.
settings.groups[].settings[].selectAll.aloneWhileOn[].on object   Nested deeper than this page draws.
settings.groups[].settings[].selectAll.aloneWhileOn[].setting object   Nested deeper than this page draws.
settings.groups[].settings[].selectAll.aloneWhileOn[].values object   Nested deeper than this page draws.
settings.groups[].settings[].selectAll.onlyWhileOn list    
settings.groups[].settings[].selectAll.onlyWhileOn[].canBeOn object   Nested deeper than this page draws.
settings.groups[].settings[].selectAll.onlyWhileOn[].on object   Nested deeper than this page draws.
settings.groups[].settings[].selectAll.onlyWhileOn[].setting object   Nested deeper than this page draws.
settings.groups[].settings[].selectAll.onlyWhileOn[].values object   Nested deeper than this page draws.
settings.groups[].settings[].source one of realm, override, env, env-legacy, appconfig, defaults, default   Where the effective value came from, highest first: this trust realm’s own value; a runtime override set through this API or the console; the setting’s own environment variable; a legacy variable (no row has one since #523); the appconfig file CONFIG_FILE names; env/defaults.js, the DEFAULT appconfig file that one is unioned on top of. default is reachable only for the DERIVED settings, whose value is a function of a neighbouring setting: for every other setting, no value anywhere stops this service from STARTING.
settings.groups[].settings[].step number   The value must be a MULTIPLE of this, counted from min. The four token lifetimes use 30.
settings.groups[].settings[].text string   The same value on one line: what the console shows in its input and what the environment variable would carry.
settings.groups[].settings[].type string   How a value posted for it is coerced and checked: one of config.js’s types (string, int, port, bool, csv, enum, color).
settings.groups[].settings[].value list, or string, or number, or boolean, or null    
settings.groups[].settings[].value[] string, or number, or boolean    
settings.overridden list   The keys on this page with a runtime override in force.
settings.overridden[] string    
settings.page string    
settings.setWith string   The operation that writes them.
settings.settingCount integer    
settings.sharedWith map   A group drawn on another page as well, and those pages.
settings.sharedWith.{key} list    
settings.sharedWith.{key}[].label string, or null    
settings.sharedWith.{key}[].path string    
shown integer    
verifiesCredentials boolean    

400: The answer.

Member Type Required What it is
error string    
error_description string    
errors list    
errors[] string    
message string    
ok boolean    

GET /admin-api/audit/integrity

getAuditIntegrity

Check the held audit rows against their checksums

Each row carries a keyed checksum whose key is not in the database, and the checksum of the row its process wrote before it. altered lists the seq of any row that no longer matches. missing lists each place a row is gone from between two held rows of one process. head says whether this process’s newest row is still there: intact; truncated when its newest rows were removed; altered when the record of which row is newest was changed; none when it has written no signed row. The oldest rows leave by design at audit.maxEvents. unsigned counts rows written with no key-encryption key in the process.

Scope: admin:read.

Parameters

Name In Type Required What it is
DPoP header string   RFC 9449: the proof of possession for a DPoP-bound access token, as Authorization: DPoP <token> requires.
cell query string   The cell to answer this request, where this service runs as several. Ignored in a service that runs as one.

200: The result.

Member Type Required What it is
altered list yes  
altered[] integer    
checked integer yes  
head one of intact, truncated, altered, none yes  
missing list yes  
missing[].after integer yes  
missing[].before integer yes  
missing[].origin string yes  
unsigned integer yes  

GET /admin-api/error-codes

getErrorCodes

Every failure condition this service can produce, and how often each is on the held audit log

The central table of error codes, STS-<SUBSYSTEM>-<NNNN>, filtered and paged: each code with the subsystem it belongs to, what failed, and what the CLIENT is told in its protocol’s own vocabulary (spec).

A CODE IS NEVER SENT TO A CLIENT. It is recorded on the audit row (errorCode on GET /admin-api/audit, filterable there with ?code=) and at the front of the service log line; every protocol response is exactly what it was.

seen counts the rows the audit log holds IN THIS REALM right now, so it falls as the log’s cap discards the oldest, and it is zero for a failure recorded only as a log line — a startup refusal, or anything the remote PEP container records. unregisteredSeen lists codes found on held rows that the table does not hold, each a failure site whose code was never registered.

The same table is published as docs/error-codes.md, generated from common/error_codes.js.

Mirrors GET /admin/error-codes on the admin console.

Scope: admin:read.

Parameters

Name In Type Required What it is
subsystem query string   One subsystem id — OAUTH, LDAP, XPEP — as subsystems[].id lists them. Case-insensitive.
q query string   Substring of the code, the summary or what the client sees, case-insensitive — a code pasted out of a log line, or a protocol error name such as invalid_grant.
seen query string   1 for only the codes on at least one held audit row.
page query integer   Which page of the match to return. CLAMPED rather than refused: a page past the end returns the last one, and the reply says which page it actually is.
per query integer   Rows per page. Defaults to 50 and is capped at 300. On a drill-down it is SHARED by every list in the reply, which each carry a page number of their own.
DPoP header string   RFC 9449: the proof of possession for a DPoP-bound access token, as Authorization: DPoP <token> requires.
cell query string   The cell to answer this request, where this service runs as several. Ignored in a service that runs as one.

200: The matching codes, the subsystems with their counts, and the paging that found them.

Member Type Required What it is
auditRowsHeld integer    
auditRowsWithCode integer    
codes list    
codes[].code string    
codes[].lastSeenAt number    
codes[].retired boolean    
codes[].seen integer    
codes[].spec string    
codes[].subsystem string    
codes[].summary string    
distinctCodesSeen integer    
documentation string    
filter object    
filter.q string, or null    
filter.seen boolean, or null    
filter.subsystem string, or null    
firstRow integer    
lastRow integer    
matched integer    
neverSentToClients boolean    
page integer    
pages integer    
paging object   Which page of how many, and the query parameter that moves it.
paging.firstRow integer    
paging.lastRow integer    
paging.noun string    
paging.page integer    
paging.pages integer    
paging.param string    
paging.perPage integer    
paging.total integer    
perPage integer    
registered integer    
retired integer    
shown integer    
subsystemCount integer    
subsystems list    
subsystems[].codes integer    
subsystems[].id string    
subsystems[].label string    
subsystems[].prefix string    
subsystems[].seen integer    
subsystems[].what string    
subsystems[].where string    
unregisteredSeen list    
unregisteredSeen[].code string    
unregisteredSeen[].lastSeenAt number    
unregisteredSeen[].seen integer